Rukus Wireless ZoneFlex 7731 Betriebsanweisung PDF herunterladen (Seite 39)

Installing the Access Point

Step 1: Preconfigure the Access Point

5. Click Use the following IP address, and then configure the IP address settings

with the values listed in Table 14

. For a sample configuration, refer to Figure 17.

You can leave the Default Gateway and DNS server fields blank.

6. Click OK to save your changes and close the TCP/IP Properties dialog box.

7. Click OK again to close the Local Area Connection Properties dialog box.

Windows saves the IP address settings that you have configured.

Figure 17. Sample configuration in the Internet Protocol (TCP/IP) Properties

dialog box

2. Connect the Access Point to the Administrative

Computer

1. Connect one end of an Ethernet cable to an Ethernet port on the Access Point,

and then connect the other end to the administrative computer’s Ethernet port.

2. Provide power to the AP using either an AC adapter or a PoE injector or switch,

as described in “1. Connect the Access Point to a Power Source”

above.

Table 14. Configure your computer’s IP address settings

IP address 192.168.0.22 (or any address in the 192.168.0.x

network—with the exception of 192.168.0.1, which

is the default IP address assigned to the Access Point)

Subnet mask 255.255.255.0

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Keine Kommentare

Rukus Wireless ZoneFlex 7731 Betriebsanweisung Seite 39