Rukus Wireless ZoneFlex 7731 Betriebsanweisung PDF herunterladen (Seite 41)

Installing the Access Point

Step 1: Preconfigure the Access Point

For your reference, the default wireless settings on the Access Point are listed in Table

15.

Configure Common Wireless Settings

1. On the left menu of the Web interface, click Configuration > Wireless (Radio

2.4G or Radio 5G on dual band APs). The Configuration > Common page

appears.

NOTE: For dual band APs (ZoneFlex 7962 and 7363), the two radios (2.4GHz and

5GHz) need to be configured separately on the Web interface. To configure the

common wireless settings, click Configuration > Radio 2.4G or Radio 5G. The rest

of the configuration procedures are the same as for other models.

2. Verify that the common wireless settings are configured as listed in Tab le 16.

3. If you made any changes to the Common tab, click Update Settings.

Table 15. Default wireless settings

Setting Default Value

SSID (network name) Wireless 1 to Wireless 8 (2.4 Ghz Radio)

Wireless 9 to Wireless 16 (5 GHz Radio -

only available on dual radio APs)

Encryption (security) Disabled on all WLANs

Default management IP address 192.168.0.1

Table 16. Common wireless configuration

Setting Recommended Value

Channel SmartSelect

Country Code • If you purchased the Access Point in the United

States, this value is fixed to United States at the

factory and is not user configurable.

• If you purchased the Access Point outside the

United States, verify that the value is set to your

country or region. Selecting the correct country

code ensures that the Access Point uses only the

radio channels allowed in your country or region.

Note for dual band AP users: The two radios on dual

band APs are always configured with the same country

code setting. If you change the country code for Radio

1, for example, the same change will be applied

automatically to Radio 2.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

Keine Kommentare

Rukus Wireless ZoneFlex 7731 Betriebsanweisung Seite 41