Rukus Wireless ZoneFlex 7731 Betriebsanweisung PDF herunterladen (Seite 87)

Configuring the Access Point

Configuring Ethernet Ports

■ If there are multiple devices connected to an AP port (through a downstream

switch), the port can be configured as either Port-based or MAC-based Authen-

ticator. In Port-based mode, only one of the attached MAC hosts must be

authorized for all hosts to be granted access to the network. In MAC-based mode,

each MAC host is individually authenticated.

■ If a Trunk Port is configured as a Supplicant, a user name and password must be

entered to authenticate the port to the 802.1X aware LAN switch.

■ If an Access Port is configured as an Authenticator, the administrator must define

the RADIUS server that the Authenticator will communicate with. All Ethernet ports

of a single AP are configured with the same RADIUS server.

Enable MAC authentication bypass: If MAC authentication bypass is enabled, the

port first attempts to authenticate the attached device by MAC address, and if that

fails, it will try to authenticate the device using 802.1X.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 119 120

Keine Kommentare

Rukus Wireless ZoneFlex 7731 Betriebsanweisung Seite 87